The flexible brick of hand-molded “IN-BRICK” No. 1-country style with light tones of silvery-white salt on the brick and a soft burn of terracotta color perfectly shows the “spirit of antiquity” of the brick wall.
“IN-BRICK” №1-country style has a pronounced texture, however it is made in a soft vintage style. With it an aged brick wall will not give brutality, but will serve as a pleasant accent in expensive and stylish interior.
Available in a choice of single tile options and a module on a fiberglass mesh
The module size is 460Х1175 mm
Module area – 0,5 m²
Seam – 12 mm
Number of tiles (bricks) on the module – 24 pcs.
Number of tiles (bricks) in m² – 48 pcs.
The size of the tile (brick) – 250X65 mm
The thickness of the tile (brick) – 4 mm
Weight / m²: 4,5 -5 kg
“IN-BRICK” is Ukrainian-standardized
Eco-friendly composition: quartz sands, modified cement, polymer compositions, iron oxide pigments
frost resistance – 75 cycles
coefficient of water absorption by mass -0.5%
water vapor permeability – 0.05 mg / (m • h • Pa)
UV stability – 8 points
flammability class – A1
fiberglass mesh: Valmiera (density 160)
The service life is more than 25 years.
|The thickness of the tiles
3mm, 4mm, 5mm
Designers choose decorative brick “IN-BRICK” No. 1-country style for interior design in country styles, romanticism, classics. In addition, he fits well in minimalism, neo-Gothic and in interiors with ethnic motives.
Today, brickwork is used everywhere: with interior decoration of private houses, apartments, hotels and offices.
Decoration zones: corridor, entrance hall, living room, bedroom, kitchen and balcony. Flexible brick is successfully used for finishing rooms with high humidity: bathrooms and swimming pools.
There are several basic techniques for decorating a brick:
apron for the kitchen
Non-standard solutions always attract attention. “IN-BRICK” No. 1-country style in the interior is “rich old”. This effect is enhanced with the help of antique “aged” furniture or textiles.
Glue-grout universal “Honest glue” DSTU B.В.2.7-126: 2011 – is applied for installation of flexible clinker, brick and tile, with external and internal use.
The name “Honest Glue” speaks first of all of the high quality of the product. Our glue corresponds to the declared parameters in the DSTU and ensures the reliability of the system of the finishing layer of the bonded insulation.
Adhesive is available in color versions (white, beige, gray, graphite) and is simultaneously a grout for seams. This approach helps to save time when installing flexible bricks, and also significantly reduces the expense of funds for expensive grouting.
Composition: cement, sand, reinforcing fibers, modifying additives.
Packing – bag 25kg
Recommended flow rate: 25kg per 5m² with a layer thickness of 4-5mm
LIGHT, FLEXIBLE, THIN!
the versatility of the product makes it possible to coat the walls with virtually any surface from the drywall, to silicate blocks.
“IN-BRICK” has a weight of 4-5kg / m², thus the Flexible brick is more reliably retained on an adhesive basis, unlike heavy tiles
there is no need for special preparation of the surface, cracks and irregularities are successfully concealed
“IN-BRICK” on the module of 0.5 m² significantly shortens the time of installation of decorative tiles and reduces the cost of construction
Hygroscopic, does not require treatment with an additional protective layer
shockproof, abrasion resistant
Durable, not susceptible to aggressive environment, UV resistant
retains all properties at temperatures from -35 ° C to + 80 ° C
elastic, bends around any surface
does not require special cutting equipment, it is easy to install independently without installing fasteners and reinforcement
for installation, the “Adhesive Glue” colored grout is applied, which reduces the time for gluing two times and saves money on expensive trowels
thin-layered, saves space
light and compact, economical in logistics.
Specificity of the product
It is necessary to take into account the following specific features of the product:
The flexible brick bends well when the temperature is raised from + 20 ° C. When in a cold room, warm the tiles with your hands before bending.
The outer corner of 90 ° should not be sharp, it must first be worn out. To bend the tiles it is recommended to warm it with a construction hair dryer to a temperature of + 60-80 ° C. When laying on a corner, avoid stretching the tiles from the corner, otherwise after the adhesive has dried on its angular part, cracks may appear on the tension. On the bend, you have to smooth the tiles with a light pressure of the fingers with the movement towards the corner.
Flexible bricks are packed in cardboard boxes.
4 mm – 3 m²